SiliconeFX~Part A CLEAR - 1oz

The One Ounce sizes are being offered separately at this point

To make your colors even more translucent, mix as follows;

1 PART COLOR PART B + 1 PART CLEAR PART B = 2 PARTS CLEAR PART A

As a final coat to use with matting powder:

1 PART CLEAR PART B = 1 PART CLEAR PART A

Mix very well and add a small amount of thinner to thin down.  Make sure you cover your kit with a very thin layer before dusting with your matting powder.

Measure equal amounts of A and B with designated spoons into a separate container and mix. Thinner/Solvent can be used and can be diluted enough for an airbrush.

Pot Life is approximately 45 minutes with solvent (20 minutes without) and tack-free is approximately 2 hours.